Professor Roger Tanner

BSc Brist MS Calif PhD Manc, FRS FAA FTSE FASME HonFIEAust FAFMS
PN Russell Professor of Mechanical Engineering
School of Aerospace, Mechanical and Mechatronic Engineering

J07 - Mechanical Engineering Building
The University of Sydney

Telephone +61 2 9351 7153
Fax +61 2 9351 7060

Website School of Aerospace, Mechanical and Mechatronic Engineering

Current research students

Project title Research student
Improving Thermal conductivity of nanofluids and metal nanoparticle suspensions Fariba BAGHERZADEH
Effects of roughness on the viscometric properties of suspensions of spheres with non-Newtonian matrices. Arif MAHMUD

Associations

  • Fellow, American Society of Mechanical Engineers
  • Fellow, Royal Society
  • Fellow, Institution of Engineers Australia
  • Fellow, Australasian Fluid Mechanics Society (AFMS)
  • Member, American Institute of Chemical Engineers
  • Member, Polymer Processing Society
  • Member, International Association for Computational Mechanics
  • Member, American Society of Rheology
  • Member, Australian Society of Rheology

Awards and honours

  • Centenary medal
  • Fellow of ASME award
  • Fellow of the Royal Society award
  • The British Society of Rheology gold medal in 2000
  • A.G.M. MICHELL medal by the institute Engineers, Australia

Selected grants

2011

  • Rheology of suspensions with viscoelastic matrices; Tanner R, Fan X; Australian Research Council (ARC)/Discovery Projects (DP).

2010

  • Modelling soft viscoelastic solids; Tanner R; Australian Research Council (ARC)/Discovery Projects (DP).

2007

  • Simulation of the rheology of a suspension of spheroidal particles in a non-Newtonian fluid - Polym; Bertevas E, Tanner R; Polymers CRC Ltd/Project Support.
  • Mullins-type effects in sofit filled viscoelastic solids; Tanner R; Australian Research Council (ARC)/Discovery Projects (DP).

2006

  • Linkage 2005 Round 2 - "Bubble Stabilization and Density Control in Self-Supporting Explosive Emulsi; Warr G, Tanner R, Hawkett B; Dyno Nobel Asia Pacific Pty Limited/Project Support.
  • Project 4.1 Effect of additives on Polymer properties; Tanner R, Wright S; CRC for Polymers/Research Grants.
  • Bubble Stabilization and Density Control in Self-Supporting Explosive Emulsions; Warr G, Hawkett B, Tanner R, Gore J, Gore J; Australian Research Council (ARC)/Linkage Projects (LP).
  • Nano-Rheology and Nano-Tribology: Atomistic Simulation of Boundary Lubrication; Tanner R, Jabbarzadeh-Khoei A; Australian Research Council (ARC)/Discovery Projects (DP).

2005

  • Parent: CRC Polymers III (2006) / # 7612 / CRC for Polymers, Manufacturing Technology Sector ( Dev; Fulton G, Crossley P, Hirst T, Dolan N, Cox J, Tanner R; Polymers CRC Ltd/Project Support.

2004

  • Soft solids rheology and filled elastomeric networks; Pereira G, Tanner R; Australian Research Council (ARC)/Discovery Projects (DP).

2003

  • Linkage 2003 Production of Optimal Microstructured Polymer Optical Fibre LP0347745; Barton G, Tanner R, Poladian L, Large M; Cactus Fibre/Project Support.
  • Production of optimal microstructured polymer optical fibre; Barton G, Tanner R, Large M, Poladian L; Australian Research Council (ARC)/Linkage Projects (LP).
  • Simulation studies of stick and slip at the solid-liquid boundary; Tanner R, Harrowell P; Australian Research Council (ARC)/Discovery Projects (DP).

2000

  • Viscoelastic flow instabilities by a transient three-dimensional finite volume method: swirling flow inside a cylinder and torsional flow between two parallel p; Phan-Thien N, Tanner R; Australian Research Council (ARC)/Large Research Grants (LRG).
  • Thin-film lubrication: molecular dynamics simulation; Atkinson J, Tanner R; Australian Research Council (ARC)/Large Research Grants (LRG).

1999

  • Archived Files (old files from RMS) for CRC for Polymers II; O'Connor R, Phan-Thien N, Tanner R.

1998

  • Fibre Orientation in a viscoelastic Matrix: Numerical and Constitutive Modelling; Tanner R, Phan-Thien N; Australian Research Council (ARC)/Strategic Partnerships with Industry - Research and Training (SPIRT).

Selected publications

Download citations: PDF RTF Endnote

Books

  • Zheng, R., Tanner, R., Fan, X. (2011). Injection Molding: Integration of Theory and Modeling Methods. Heidelberg Dordrecht London New York: Springer. [More Information]
  • Fan, X., Phan-Thien, N., Tanner, R. (2008). Numerical Study on Some Rheological Problems of Fibre Suspensions: Numerical Simulations of Fibre Suspensions. Germany: VDM Verlag Dr Muller.

Book Chapters

  • Jabbarzadeh-Khoei, A., Tanner, R. (2006). Molecular Dynamics Simulation and its Application to Nano-Rheology. In Bindings D M and Walters K (Eds.), Rheology Reviews, (pp. 165-216). Aberystwyth UK: British Society of Rheology.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2002). Effect of branching on the lubricant properties: A molecular dynamics study. In D Dowson, M Priest, G Dalmaz, AA Lubrecht (Eds.), Boundary and Mixed Lubrication: Science and Applications, (pp. 231-240). United States: Elsevier.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2001). Lubrication processes near wall asperities: a molecular dynamics study. In G. Dalmaz, A.A. Lubrecht, D. Dowson and M. Priest (Eds.), Tribology Research: From model experiment to industrial problem, (pp. 779-785). Netherlands: Academic Press.

Journals

  • Dai, S., Tanner, R. (2017). Elongational flows of some non-colloidal suspensions. Rheologica Acta, 56(1), 63-71. [More Information]
  • Vazquez-Quesada, A., Mahmud, A., Dai, S., Ellero, M., Tanner, R. (2017). Investigating the causes of shear-thinning in non-colloidal suspensions: Experiments and simulations. Journal of Non-Newtonian Fluid Mechanics, 248, 1-7. [More Information]
  • Housiadas, K., Tanner, R. (2016). A high-order perturbation solution for the steady sedimentation of a sphere in a viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 233, 166-180. [More Information]
  • Moon, J., Tanner, R., Lee, J. (2016). A numerical study on the elastic modulus of volume and area dilation for a deformable cell in a microchannel. Biomicrofluidics, 10(4), 1-15. [More Information]
  • Tanner, R., Dai, S. (2016). Particle roughness and rheology in noncolloidal suspensions. Journal of Rheology, 60(4), 809-818. [More Information]
  • Stalker, C., Morgan, R., Tanner, R. (2016). Raymond John Stalker 1930-2014. Historical Records of Australian Science, 27(1), 70-80. [More Information]
  • Tanner, R., Dai, S. (2016). Rheology of non-colloidal suspensions with corn syrup matrices. Rheologica Acta, 55(9), 739-747. [More Information]
  • Tanner, R., Masri, A. (2016). Robert William Bilger 1935�2015. Historical Records of Australian Science, 27(2), 133-143. [More Information]
  • Vazquez-Quesada, A., Tanner, R., Ellero, M. (2016). Shear Thinning of Noncolloidal Suspensions. Physical Review Letters, 117(10), 1-5. [More Information]
  • Housiadas, K., Georgiou, G., Tanner, R. (2015). A note on the unbounded creeping flow past a sphere for Newtonian fluids with pressure-dependent viscosity. International Journal of Engineering Science, 86(2015), 1-9. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2015). Bread Dough Rheology: Computing with a Damage Function Model. AIP Conference Proceedings, 1642, 278-281. [More Information]
  • Tanner, R. (2015). Non-colloidal suspensions: Relations between theory and experiment in shearing flows. Journal of Non-Newtonian Fluid Mechanics, 222, 18-23. [More Information]
  • Moon, J., Dai, S., Chang, L., Lee, J., Tanner, R. (2015). The effect of sphere roughness on the rheology of concentrated suspensions. Journal of Non-Newtonian Fluid Mechanics, 223, 233-239. [More Information]
  • Housiadas, K., Tanner, R. (2014). A model for the shear viscosity of non-colloidal suspensions with Newtonian matrix fluids. Rheologica Acta, 53(10-11), 831-841. [More Information]
  • Moshfegh, A., Jabbarzadeh-Khoei, A., Tanner, R. (2014). Analysis of Dissipative Particle Dynamics Fluid in Sheared Regimes. Applied Mechanics and Materials, 553, 115-120. [More Information]
  • Tanner, R., Housiadas, K., Qi, F. (2014). Mechanism of drag increase on spheres in viscoelastic cross-shear flows. Journal of Non-Newtonian Fluid Mechanics, 203, 51-53. [More Information]
  • Uthayakumaran, S., Tanner, R., Dai, S., Qi, F., Wrigley, C. (2014). Relationships between Traditional and Fundamental Dough-testing methods. Cereal Research Communications, 42(2), 282-292. [More Information]
  • Housiadas, K., Tanner, R. (2014). Rheological effects in the 3D creeping flow past a sedimenting sphere subject to orthogonal shear. Physics of Fluids, 26(1), 013102-1-013102-17. [More Information]
  • Dai, S., Qi, F., Tanner, R. (2014). Viscometric functions of concentrated non-colloidal suspensions of spheres in a viscoelastic matrix. Journal of Rheology, 58(1), 183-198. [More Information]
  • Qi, F., Dai, S., Uthayakumaran, S., Tanner, R. (2013). Comparing compression and biaxial tests for bread dough. Journal of Non-Newtonian Fluid Mechanics, 198, 18-23. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2013). Scaling the normal stresses in concentrated non-colloidal suspensions of spheres. Rheologica Acta, 52(4), 291-295. [More Information]
  • Tanner, R., Qi, F., Uthayakumaran, S., Dai, S. (2013). The effect of pre-test deformation on dough rheology. Rheologica Acta, 52(1), 33-38. [More Information]
  • Dai, S., Bertevas, E., Qi, F., Tanner, R. (2013). Viscometric functions for noncolloidal sphere suspensions with Newtonian matrices. Journal of Rheology, 57(2), 493-510. [More Information]
  • Tanner, R., Dai, S., Qi, F., Housiadas, K. (2013). Viscometric functions of semi-dilute non-colloidal suspensions of spheres in a viscoelastic matrix. Journal of Non-Newtonian Fluid Mechanics, 201, 130-134. [More Information]
  • Lee Wo, D., Tanner, R., Fletcher, D. (2012). A numerical treatment of crystallization in tube flow. Polymer Engineering and Science, 52(6), 1356-1366. [More Information]
  • Dai, S., Tanner, R. (2012). Aspects of elongational testing with bread dough. Journal of Rheology, 56(2), 385-395. [More Information]
  • Uthayakumaran, S., Tanner, R., Dai, S., Qi, F., Newberry, M., Wrigley, C., Copeland, L. (2012). Genotype-based Stability of Dough Quality in Wheat from Different Growth Environments. Journal of Agricultural Science, 4(7), 41-50. [More Information]
  • Housiadas, K., Tanner, R. (2012). Perturbation solution for the viscoelastic flow around a rigid sphere under pure uniaxial elongation. Journal of Non-Newtonian Fluid Mechanics, 167-168, 75-86. [More Information]
  • Qi, F., Tanner, R. (2012). Random close packing and relative viscosity of multimodal suspensions. Rheologica Acta, 51(4), 289-302. [More Information]
  • Housiadas, K., Tanner, R. (2012). The drag of a freely sendimentating sphere in a sheared weakly viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 183-184, 52-56. [More Information]
  • Tanner, R., Uthayakumaran, S., Qi, F., Dai, S. (2011). A suspension model of the linear viscoelasticity of gluten doughs. Journal of Cereal Science, 54(2), 224-228. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2011). Bread dough rheology: An improved damage function model. Rheologica Acta, 50(1), 75-86. [More Information]
  • Dai, S., Qi, F., Tanner, R. (2011). Interpreting shear creep data for bread dough using a damage function model. Applied Rheology (Fliessverhalten steuern), 21(4), 45070-1-45070-6. [More Information]
  • Housiadas, K., Tanner, R. (2011). Perturbation solution for the viscoelastic 3D flow around a rigid sphere subject to simple shear. Physics of Fluids, 23, 083101-1-083101-20. [More Information]
  • Qi, F., Tanner, R. (2011). Relative viscosity of bimodal suspensions. Korea - Australia Rheology Journal, 23(2), 105-111. [More Information]
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2011). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346. [More Information]
  • Housiadas, K., Tanner, R. (2011). The angular velocity of a freely rotating sphere in a weakly viscoelastic matrix fluid. Physics of Fluids, 23(5), 051702-1-051702-4. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2011). Thin lubricant films confined between crystalline surfaces: Gold versus mica. Tribology International, 44(6), 711-719. [More Information]
  • Tanner, R., Qi, F., Housiadas, K. (2010). A differential approach to suspensions with power-law matrices. Journal of Non-Newtonian Fluid Mechanics, 165(23-24), 1677-1681. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2010). Bread dough rheology: an improved damage function model. Rheologica Acta, 50(1), 75-86. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2010). Flow-Induced Crystallization: Unravelling the Effects of Shear Rate and Strain. Macromolecules, 43(19), 8136-8142. [More Information]
  • Zheng, R., Tanner, R., Lee Wo, D., Fan, X., Hadinata, C., Costa, F., Kennedy, P., Zhu, P., Edward, G. (2010). Modeling of flow-induced crystallization of colored polypropylene in injection molding. Korea - Australia Rheology Journal, 22(3), 151-162.
  • Fan, X., Zheng, R., Liu, G., Tanner, R., Edward, G. (2010). Modelling Post-molding Warping. International Polymer Processing, 25(1), 47-54. [More Information]
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2010). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346. [More Information]
  • Bertevas, E., Fan, X., Tanner, R. (2010). Simulation of the rheological properties of suspensions of oblate spheroidal particles in a Newtonian fluid. Rheologica Acta, 49(1), 53-73. [More Information]
  • Fan, X., Tanner, R., Zheng, R. (2010). Smoothed particle hydrodynamics simulation of non-Newtonian moulding flow. Journal of Non-Newtonian Fluid Mechanics, 165, 219-226. [More Information]
  • Amirkaveei, S., Dai, S., Newberry, M., Qi, F., Shahedi, M., Tanner, R. (2009). A comparison of the rheology of four wheat flour doughs via a damage function model. Applied Rheology (Fliessverhalten steuern), 19(3), 1705-34305-9.
  • Tanner, R., Qi, F., Housiadas, K. (2009). A differential model for the rheological properties of concentrated suspensions with weakly viscoelastic matrices. Rheologica Acta, Online(2), 1-8. [More Information]
  • Tanner, R., Hadinata, C., Lee Wo, D. (2009). Behaviour of a simple crystallisation model in tube and channel flow. Rheologica Acta, 48(5), 499-507. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2009). Crystallization of alkanes under quiescent and shearing conditions. Journal of Non-Newtonian Fluid Mechanics, 160, 99-21. [More Information]
  • Housiadas, K., Tanner, R. (2009). On the rheology of a dilute suspension of rigid spheres in a weakly viscoelastic matrix fluid. Journal of Non-Newtonian Fluid Mechanics, 162(1-3), 88-92. [More Information]
  • Tanner, R., Qi, F. (2009). Stretching, shearing and solidification. Chemical Engineering Science, 64(22), 4576-4579. [More Information]
  • Tanner, R. (2009). The changing face of rheology. Journal of Non-Newtonian Fluid Mechanics, 157(3), 141-144. [More Information]
  • Lee Wo, D., Tanner, R. (2009). The impact of blue organic and inorganic pigments on the crystallization and rheological properties of isotactic polypropylene. Rheologica Acta, Online, 1-14. [More Information]
  • Qi, F., Dai, S., Newberry, M., Love, R., Tanner, R. (2008). A simple approach to predicting dough sheeting thickness. Journal of Cereal Science, 47(3), 489-495. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2008). Bread dough rheology and recoil I. Rheology. Journal of Non-Newtonian Fluid Mechanics, 148, 33-40. [More Information]
  • Tanner, R., Dai, S., Qi, F. (2008). Bread dough rheology in biaxial and step-shear deformations. Rheologica Acta, 47(7), 739-749. [More Information]
  • Tanner, R., Jabbarzadeh-Khoei, A. (2008). Thin-film lubrication nano-rheology via molecular dynamics. Australian Journal of Mechanical Engineering, 5(1), 43-50.
  • Mai-Duy, N., Tanner, R. (2007). A collocation method based on one-dimensional RBF interpolation scheme for solving PDEs. International Journal of Numerical Methods for Heat and Fluid Flow, 17(2), 165-186. [More Information]
  • Mai-Duy, N., Tanner, R. (2007). A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201(1), 30-47. [More Information]
  • Tanner, R., Dai, S., Qi, F. (2007). Bread dough rheology and recoil 2. Recoil and relaxation. Journal of Non-Newtonian Fluid Mechanics, 143, 107-119. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2007). Crystal bridges, tetratic order, and elusive equilibria: The role of structure in lubrication films. The Journal of Physical Chemistry B, 111(39), 11354-11365. [More Information]
  • Yu, Z., Shao, X., Tanner, R. (2007). Dynamic simulation of shear-induced particle migration in a two-dimensional circular couette device. Chinese Journal of Chemical Engineering, 15(3), 333-338. [More Information]
  • Tanner, R. (2007). Revisitation of PTT model. Journal of Central South University of Technology, 14(Suppl 1), 26-29. [More Information]
  • Yu, Z., Phan-Thien, N., Tanner, R. (2007). Rotation of a spheroid in a Couette flow at moderate Reynolds numbers. Physical Review E, 76, 026310-1-026310-11. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2007). The structural origin of the complex rheology in thin dodecane films: Three routes to low friction. Tribology International, 40(10-12), 1574-1586. [More Information]
  • Mai-Duy, N., Tran-Cong, T., Tanner, R. (2006). A domain-type boundary-integral-equation method for two-dimensional biharmonic Dirichlet problem. Engineering Analysis with Boundary Elements, 30(10), 809-817. [More Information]
  • Mai-Duy, N., Tran-Cong, T., Tanner, R. (2006). A new high-order time-kernel BIEM for the Burgers equation. CMES: Computer Modeling in Engineering and Sciences, 16(3), 177-186.
  • Dai, S., Tanner, R. (2006). Anisotropic thermal conductivity in sheared polypropylene. Rheologica Acta, 45(3), 228-238. [More Information]
  • Tanner, R., Xue, S. (2006). Change of shape of an off-axis hole during optical fibre drawing. Acta Mechanica, 187(1-4), 129-138. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2006). Crystal bridge formation marks the transition to rigidity in a thin lubrication film. Physical Review Letters, 96(20), 206102-1-206102-4. [More Information]
  • Ausias, G., Fan, X., Tanner, R. (2006). Direct simulation for concentrated fibre suspensions in transient and steady state shear flows. Journal of Non-Newtonian Fluid Mechanics, 135(1), 46-57. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2006). Low friction lubrication between amorphous walls: Unraveling the contributions of surface roughness and in-plane disorder. Journal of Chemical Physics, 125(3), 034703-1-034703-11. [More Information]
  • Wang, C., Dai, S., Tanner, R. (2006). On the compressibility of bread dough. Korea - Australia Rheology Journal, 18(3), 127-131.
  • Tanner, R. (2006). On the congruence of some network and pom-pom models. Korea - Australia Rheology Journal, 18(1), 9-14. [More Information]
  • Xue, S., Large, M., Barton, G., Tanner, R., Poladian, L., Lwin, R. (2006). Role of Material Properties and Drawing Conditions in the Fabrication of Microstructured Optical Fibers. Journal of Lightwave Technology, 24(2), 853-860. [More Information]
  • Dai, S., Qi, F., Tanner, R. (2006). Strain and strain-rate formulation for flow-induced crystallization. Polymer Engineering and Science, 46(5), 659-669. [More Information]
  • Tanner, R., Qi, F. (2005). A comparison of some models for describing polymer crystallization at low deformation rates. Journal of Non-Newtonian Fluid Mechanics, 127(2-3), 131-141. [More Information]
  • Tanner, R., Qi, F. (2005). A phenomenological approach to suspensions with viscoelastic matrices. Korea - Australia Rheology Journal, 17, 149-156. [More Information]
  • Liang, G., Hawkett, B., Tanner, R. (2005). A rheological investigation of the self-assembly and adsorption behavior of a surfactant salt. Journal of Colloid and Interface Science, 292(1), 46-53. [More Information]
  • Tanner, R. (2005). A theory of die-swell revisited. Journal of Non-Newtonian Fluid Mechanics, 129(2), 85-87. [More Information]
  • Mai-Duy, N., Tanner, R. (2005). An effective high order interpolation scheme in BIEM for biharmonic boundary value problems. Engineering Analysis with Boundary Elements, 29(3), 210-223. [More Information]
  • Mai-Duy, N., Tanner, R. (2005). Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48(12), 1309-1336. [More Information]
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part I: Problem formulation and numerical modeling of transient draw process. Journal of Lightwave Technology, 23(7), 2245-2254. [More Information]
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part II: Numerical modeling of steady-state draw process. Journal of Lightwave Technology, 23(7), 2255-2266. [More Information]
  • Tanner, R., Zdilar, A., Nasseri, S. (2005). Recoil from elongation using general network models. Rheologica Acta, 44(5), 513-520. [More Information]
  • Mai-Duy, N., Tanner, R. (2005). Solving high-order partial differential equations with indirect radial basis function networks. International Journal for Numerical Methods in Engineering, 63(11), 1636-1654. [More Information]
  • Ellero, M., Tanner, R. (2005). SPH simulations of transient viscoelastic flows at low Reynolds number. Journal of Non-Newtonian Fluid Mechanics, 132(1), 61-72. [More Information]
  • Fan, Y., Yang, H., Tanner, R. (2005). Stress boundary layers in the viscoelastic flow past a cylinder in a channel: limiting solutions. Acta Mechanica Sinica, 21(4), 311-321. [More Information]
  • Liang, G., Hawkett, B., Tanner, R. (2005). The determination of the isoelectric point from measurements of dispersion viscosity as a function of pH. Journal of Dispersion Science and Technology, 26(4), 469-472. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2005). Very low friction state of a dodecane film confined between mica surfaces. Physical Review Letters, 94(12), 126103-126103-4. [More Information]
  • Yu, Z., Phan-Thien, N., Tanner, R. (2004). Dynamic Simulation Of Sphere Motion In A Vertical Tube. Journal of Fluid Mechanics, 518, 61-93. [More Information]
  • Nasseri, S., Bilston, L., Fasheun, B., Tanner, R. (2004). Modelling The Biaxial Elongational Deformation Of Soft Solids. Rheologica Acta, 43(1), 68-79. [More Information]
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2003). A parallel algorithm for molecular dynamics simulation of branched molecules. Computer Physics Communications, 150(2), 65-84. [More Information]
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2003). Effect of Molecular Shape on Rheological Properties in Molecular Dynamics Simulation of Star, H, Comb and Linear Polymer Melts. Macromolecules, 36(13), 5020-5031. [More Information]
  • Tanner, R., Tanner, E. (2003). Heinrich Hencky: a rheological pioneer. Rheologica Acta, 42(1-2), 93-101. [More Information]
  • Tanner, R. (2003). On the flow of crystallizing polymers. I. Linear regime. Journal of Non-Newtonian Fluid Mechanics, 112(2-3), 251-268. [More Information]
  • Fan, Y., Dai, S., Tanner, R. (2003). Rheological properties of some thermotropic liquid crystalline polymers. Korea - Australia Rheology Journal, 15(3), 109-115.
  • See, H., Tanner, R. (2003). Shear rate dependence of the normal force of a magnetorheological suspension. Rheologica Acta, 42(1-2), 166-170. [More Information]
  • Tanner, R., Nasseri, S. (2003). Simple constitutive models for linear and branched polymers. Journal of Non-Newtonian Fluid Mechanics, 116(1), 1-17. [More Information]
  • Kitoko, V., Keentok, M., Tanner, R. (2003). Study of shear and elongational flow of solidifying polypropylene melt for low deformation rates. Korea - Australia Rheology Journal, 15(2), 63-73.
  • Tanner, R. (2002). A suspension model for low shear rate polymer solidification. Journal of Non-Newtonian Fluid Mechanics, 102(2), 397-408. [More Information]
  • Carter, J., Poulos, H., Tanner, R. (2002). Biographical memoirs: John Robert Booker 1942-1998. Historical Records of Australian Science, 14(2), 143-168.
  • Tanner, R., Xue, S. (2002). Computing transient flows with high elasticity. Korea - Australia Rheology Journal, 14(4), 143-159.
  • Former, C., Castro, J., Fellows, C., Tanner, R., Gilbert, R. (2002). Effect of Branching and Molecular Weight on the Viscoelastic Properties of Poly(butyl acrylate). Journal of Polymer Science, Part A: Polymer Chemistry, 40(20), 3335-3349. [More Information]
  • Tanner, R. (2002). Note on the beginnings of sinusoidal testing methods. Korea - Australia Rheology Journal, 14(2), 87-90.
  • Uthayakumaran, S., Beasley, H., Stoddard, F., Keentok, M., Phan-Thien, N., Tanner, R., Bekes, F. (2002). Synergistic and additive effects of three high molecular weight glutenin subunit Loci. I. Effects on wheat dough rheology. Cereal Chemistry, 79(2), 294-300.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2002). The effect of branching on slip and rheological properties of lubricants in molecular dynamics simulation of Couette shear flow. Tribology International, 35(1), 35-46. [More Information]
  • Keentok, M., Newberry, M., Gras, P., Bekes, F., Tanner, R. (2002). The rheology of bread dough made from four commercial flours. Rheologica Acta, 41(1-2), 173-179.
  • Xue, S., Phan-Thien, N., Tanner, R. (2002). Upwinding with deferred correction (UPDC): an effective implementation of higher-order convection schemes for implicit finite volume methods. Journal of Non-Newtonian Fluid Mechanics, 108(1-3), 1-24. [More Information]
  • Fan, Y., Tanner, R., Phan-Thien, N. (2001). Fully developed viscous and viscoelastic flows in curved pipes. Journal of Fluid Mechanics, 440, 327-357.
  • Fan, Y., Phan-Thien, N., Tanner, R. (2001). Tangential flow and advective mixing of viscoplastic fluids between eccentric cylinders. Journal of Fluid Mechanics, 431, 65-89.
  • Tanner, R. (1980). A new inelastic theory of extrudate swell. Journal of Non-Newtonian Fluid Mechanics, 6(3-4), 289-302. [More Information]

Conferences

  • Jabbarzadeh-Khoei, A., Tanner, R. (2010). Separating the effects of shear rate and strain on flow induced crystallization of polymers by large scale molecular simulations. International Soft Matter Conference 2010, Spain: RSC Publishing.
  • Tanner, R., Dai, S., Qi, F., Newberry, M., Bekes, F. (2009). Basic dough rheology and the Kieffer Test. 5th International Symposium on Food Rheology and Structure, Zurich, Switzerland: ETH Zurich.
  • Xue, S., Barton, G., Tanner, R. (2009). Heat Transfer within a Furnace for Drawing Microstructured Optical Fibres. 18th International Conference on Plastic Optical Fibers (POF 2009), CD-rom: University of Sydney.
  • Tanner, R., Lee Wo, D., Zheng, R., Costa, F. (2009). Impact of Colorants on Polypropylene Rheology. Advances in Polymer Science and Technology 1, Linz, Austria: Trauner Verlag.
  • Tanner, R. (2009). Yielding behaviour without an explicit yield stress for soft materials. XXII International Congress of Theoretical and Applied Mechanics, South Australia: ICTAM.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2008). Complex Rheology of Molecularly Thin Films and the Role of Surface and Structure. The XVth International Congress On Rheology- The Society of Rheology 80th Annual Meeting, United States of America: American Institute of Physics (AIP).
  • Tanner, R. (2008). Towards a simple constitutive model for bread dough. The XVth International Congress On Rheology- The Society of Rheology 80th Annual Meeting, United States of America: American Institute of Physics (AIP).
  • Jabbarzadeh-Khoei, A., Tanner, R. (2007). Molecular Dynamics Simulation of Crystallization under Quiescent and Shearing Conditions. International Conference on Computational Methods in Science and Engineering 2007 (ICCMSE 2007), Melville, New York United States: American Institute of Physics (AIP).
  • Large, M., Van Eijkelenborg, M., Lwin, R., Barton, G., Poladian, L., Tanner, R., Xue, S. (2006). An Overview of mPOF Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Experimental Analysis of Hole Deformation During Microstructured Polymer Optical Fibre Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Validating the Rheological Changes during the Fibre Drawing of Microstructured Optical Fibres. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.
  • Tanner, R. (2005). A Revisitation of the PTT Model. 4th Pacific Rim Conference on Rheology (PRCR4), Shanghai, China: Science Press USA.
  • Xue, S., Large, M., Barton, G., Tanner, R., Lwin, R., Poladian, L. (2005). Hole Deformation Behaviour in Drawing Microstructured Optical Fibres. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Barton, G., Keawfanapadol, T., Large, M., Lwin, R., Poladian, L., Tanner, R., Xue, S. (2005). Microstructured polymer optical fibres - from concept to reality. 7th World Congress of Chemical Engineering, Glasgow, Scotland: IChemE.
  • Lwin, R., Barton, G., Keawfanapadol, T., Large, M., Poladian, L., Tanner, R., Van Eijkelenborg, M., Xue, S. (2005). Suspended Core Microstructured Polymer Optical Fibre: Connecting to Reality. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Mai-Duy, N., Tanner, R. (2004). An Efficient Bem For Numerical Solution Of The Biharmonic Boundary Value Problem. The 2004 International Conference on Computational Experimental Engineering and Sciences (ICCES04). Tech Science Press.
  • Xue, S., Barton, G., Large, M., Lwin, R., Poladian, L., Tanner, R. (2004). Analysis of Hole Deformation in Drawing Microstructured Optical Fibres. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Large, M., Barton, G., Lwin, R., Poladian, L., Tanner, R., Xue, S., Yu, H. (2004). Hole Deformation in Microstructured Optical Fibres. ECOC 2004 - 30th European Conference on Optical Communications, Stockholm, Sweden: (IEEE) Institute of Electrical and Electronics Engineers.
  • Poladian, L., Barton, G., Large, M., Lwin, R., Pok, W., Tanner, R., Van Eijkelenborg, M., Xue, S., Yu, H. (2004). Microstructured Polymer Optical Fibres: Impact of Imperfections in Design and Manufacture. OECC/COIN 2004 - Optoelectronics and Communications Conference and Conference on Optical Internet.
  • Mai-Duy, N., Tanner, R. (2004). Numerical Analysis Of Corrugated Tube Flow Using RBFNs. The XIVth International Congress on Rheology (ICR 2004). The Korean Society of Rheology.
  • Tanner, R. (2001). A century of stress and strain in rheology. 3rd Pacific Rim Conference on Rheolgoy. Ads & Adea.
  • Xue, S., Tanner, R., Phan-Thien, N. (2001). Direct numerical investigation on three-dimensional, time-dependent Newtonian rotational flow between two rotating coaxial disks with a finite domain. 1st Asian-Pacific Congress on Computational Mechanics. UNSW Australian Defence Force Academy.
  • Xue, S., Tanner, R., Phan-Thien, N. (2001). Direct numerical simulations on torsional flow of viscoelastic fluid in parallel plate rheometer with a finite radial domain. 3rd Pacific Rim Conference on Rheolgoy. Ads & Adea.
  • Uthayakumaran, S., Newberry, M., Tanner, R., Phan-Thien, N. (2001). Gluten and starch: builders of dough rheology. Cereals 2000, : UNSW Australian Defence Force Academy.
  • Uthayakumaran, S., Hubraq, T., Keentok, M., Tanner, R., Daqiq, L., Beasley, H., Partridge, S., Gras, P., Bekes, F. (2001). Role of HMW-GS in defining the basic and applied rheological parameters and end-use quality of wheat flour dough. Cereas l2000, : UNSW Australian Defence Force Academy.
  • Keentok, M., Newberry, M., Tanner, R., Gras, P., Bekes, F. (2001). The rheology of bread dough made from commercial flours. Cereals 2000, : UNSW Australian Defence Force Academy.

2017

  • Dai, S., Tanner, R. (2017). Elongational flows of some non-colloidal suspensions. Rheologica Acta, 56(1), 63-71. [More Information]
  • Vazquez-Quesada, A., Mahmud, A., Dai, S., Ellero, M., Tanner, R. (2017). Investigating the causes of shear-thinning in non-colloidal suspensions: Experiments and simulations. Journal of Non-Newtonian Fluid Mechanics, 248, 1-7. [More Information]

2016

  • Housiadas, K., Tanner, R. (2016). A high-order perturbation solution for the steady sedimentation of a sphere in a viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 233, 166-180. [More Information]
  • Moon, J., Tanner, R., Lee, J. (2016). A numerical study on the elastic modulus of volume and area dilation for a deformable cell in a microchannel. Biomicrofluidics, 10(4), 1-15. [More Information]
  • Tanner, R., Dai, S. (2016). Particle roughness and rheology in noncolloidal suspensions. Journal of Rheology, 60(4), 809-818. [More Information]
  • Stalker, C., Morgan, R., Tanner, R. (2016). Raymond John Stalker 1930-2014. Historical Records of Australian Science, 27(1), 70-80. [More Information]
  • Tanner, R., Dai, S. (2016). Rheology of non-colloidal suspensions with corn syrup matrices. Rheologica Acta, 55(9), 739-747. [More Information]
  • Tanner, R., Masri, A. (2016). Robert William Bilger 1935�2015. Historical Records of Australian Science, 27(2), 133-143. [More Information]
  • Vazquez-Quesada, A., Tanner, R., Ellero, M. (2016). Shear Thinning of Noncolloidal Suspensions. Physical Review Letters, 117(10), 1-5. [More Information]

2015

  • Housiadas, K., Georgiou, G., Tanner, R. (2015). A note on the unbounded creeping flow past a sphere for Newtonian fluids with pressure-dependent viscosity. International Journal of Engineering Science, 86(2015), 1-9. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2015). Bread Dough Rheology: Computing with a Damage Function Model. AIP Conference Proceedings, 1642, 278-281. [More Information]
  • Tanner, R. (2015). Non-colloidal suspensions: Relations between theory and experiment in shearing flows. Journal of Non-Newtonian Fluid Mechanics, 222, 18-23. [More Information]
  • Moon, J., Dai, S., Chang, L., Lee, J., Tanner, R. (2015). The effect of sphere roughness on the rheology of concentrated suspensions. Journal of Non-Newtonian Fluid Mechanics, 223, 233-239. [More Information]

2014

  • Housiadas, K., Tanner, R. (2014). A model for the shear viscosity of non-colloidal suspensions with Newtonian matrix fluids. Rheologica Acta, 53(10-11), 831-841. [More Information]
  • Moshfegh, A., Jabbarzadeh-Khoei, A., Tanner, R. (2014). Analysis of Dissipative Particle Dynamics Fluid in Sheared Regimes. Applied Mechanics and Materials, 553, 115-120. [More Information]
  • Tanner, R., Housiadas, K., Qi, F. (2014). Mechanism of drag increase on spheres in viscoelastic cross-shear flows. Journal of Non-Newtonian Fluid Mechanics, 203, 51-53. [More Information]
  • Uthayakumaran, S., Tanner, R., Dai, S., Qi, F., Wrigley, C. (2014). Relationships between Traditional and Fundamental Dough-testing methods. Cereal Research Communications, 42(2), 282-292. [More Information]
  • Housiadas, K., Tanner, R. (2014). Rheological effects in the 3D creeping flow past a sedimenting sphere subject to orthogonal shear. Physics of Fluids, 26(1), 013102-1-013102-17. [More Information]
  • Dai, S., Qi, F., Tanner, R. (2014). Viscometric functions of concentrated non-colloidal suspensions of spheres in a viscoelastic matrix. Journal of Rheology, 58(1), 183-198. [More Information]

2013

  • Qi, F., Dai, S., Uthayakumaran, S., Tanner, R. (2013). Comparing compression and biaxial tests for bread dough. Journal of Non-Newtonian Fluid Mechanics, 198, 18-23. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2013). Scaling the normal stresses in concentrated non-colloidal suspensions of spheres. Rheologica Acta, 52(4), 291-295. [More Information]
  • Tanner, R., Qi, F., Uthayakumaran, S., Dai, S. (2013). The effect of pre-test deformation on dough rheology. Rheologica Acta, 52(1), 33-38. [More Information]
  • Dai, S., Bertevas, E., Qi, F., Tanner, R. (2013). Viscometric functions for noncolloidal sphere suspensions with Newtonian matrices. Journal of Rheology, 57(2), 493-510. [More Information]
  • Tanner, R., Dai, S., Qi, F., Housiadas, K. (2013). Viscometric functions of semi-dilute non-colloidal suspensions of spheres in a viscoelastic matrix. Journal of Non-Newtonian Fluid Mechanics, 201, 130-134. [More Information]

2012

  • Lee Wo, D., Tanner, R., Fletcher, D. (2012). A numerical treatment of crystallization in tube flow. Polymer Engineering and Science, 52(6), 1356-1366. [More Information]
  • Dai, S., Tanner, R. (2012). Aspects of elongational testing with bread dough. Journal of Rheology, 56(2), 385-395. [More Information]
  • Uthayakumaran, S., Tanner, R., Dai, S., Qi, F., Newberry, M., Wrigley, C., Copeland, L. (2012). Genotype-based Stability of Dough Quality in Wheat from Different Growth Environments. Journal of Agricultural Science, 4(7), 41-50. [More Information]
  • Housiadas, K., Tanner, R. (2012). Perturbation solution for the viscoelastic flow around a rigid sphere under pure uniaxial elongation. Journal of Non-Newtonian Fluid Mechanics, 167-168, 75-86. [More Information]
  • Qi, F., Tanner, R. (2012). Random close packing and relative viscosity of multimodal suspensions. Rheologica Acta, 51(4), 289-302. [More Information]
  • Housiadas, K., Tanner, R. (2012). The drag of a freely sendimentating sphere in a sheared weakly viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 183-184, 52-56. [More Information]

2011

  • Tanner, R., Uthayakumaran, S., Qi, F., Dai, S. (2011). A suspension model of the linear viscoelasticity of gluten doughs. Journal of Cereal Science, 54(2), 224-228. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2011). Bread dough rheology: An improved damage function model. Rheologica Acta, 50(1), 75-86. [More Information]
  • Zheng, R., Tanner, R., Fan, X. (2011). Injection Molding: Integration of Theory and Modeling Methods. Heidelberg Dordrecht London New York: Springer. [More Information]
  • Dai, S., Qi, F., Tanner, R. (2011). Interpreting shear creep data for bread dough using a damage function model. Applied Rheology (Fliessverhalten steuern), 21(4), 45070-1-45070-6. [More Information]
  • Housiadas, K., Tanner, R. (2011). Perturbation solution for the viscoelastic 3D flow around a rigid sphere subject to simple shear. Physics of Fluids, 23, 083101-1-083101-20. [More Information]
  • Qi, F., Tanner, R. (2011). Relative viscosity of bimodal suspensions. Korea - Australia Rheology Journal, 23(2), 105-111. [More Information]
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2011). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346. [More Information]
  • Housiadas, K., Tanner, R. (2011). The angular velocity of a freely rotating sphere in a weakly viscoelastic matrix fluid. Physics of Fluids, 23(5), 051702-1-051702-4. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2011). Thin lubricant films confined between crystalline surfaces: Gold versus mica. Tribology International, 44(6), 711-719. [More Information]

2010

  • Tanner, R., Qi, F., Housiadas, K. (2010). A differential approach to suspensions with power-law matrices. Journal of Non-Newtonian Fluid Mechanics, 165(23-24), 1677-1681. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2010). Bread dough rheology: an improved damage function model. Rheologica Acta, 50(1), 75-86. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2010). Flow-Induced Crystallization: Unravelling the Effects of Shear Rate and Strain. Macromolecules, 43(19), 8136-8142. [More Information]
  • Zheng, R., Tanner, R., Lee Wo, D., Fan, X., Hadinata, C., Costa, F., Kennedy, P., Zhu, P., Edward, G. (2010). Modeling of flow-induced crystallization of colored polypropylene in injection molding. Korea - Australia Rheology Journal, 22(3), 151-162.
  • Fan, X., Zheng, R., Liu, G., Tanner, R., Edward, G. (2010). Modelling Post-molding Warping. International Polymer Processing, 25(1), 47-54. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2010). Separating the effects of shear rate and strain on flow induced crystallization of polymers by large scale molecular simulations. International Soft Matter Conference 2010, Spain: RSC Publishing.
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2010). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346. [More Information]
  • Bertevas, E., Fan, X., Tanner, R. (2010). Simulation of the rheological properties of suspensions of oblate spheroidal particles in a Newtonian fluid. Rheologica Acta, 49(1), 53-73. [More Information]
  • Fan, X., Tanner, R., Zheng, R. (2010). Smoothed particle hydrodynamics simulation of non-Newtonian moulding flow. Journal of Non-Newtonian Fluid Mechanics, 165, 219-226. [More Information]

2009

  • Amirkaveei, S., Dai, S., Newberry, M., Qi, F., Shahedi, M., Tanner, R. (2009). A comparison of the rheology of four wheat flour doughs via a damage function model. Applied Rheology (Fliessverhalten steuern), 19(3), 1705-34305-9.
  • Tanner, R., Qi, F., Housiadas, K. (2009). A differential model for the rheological properties of concentrated suspensions with weakly viscoelastic matrices. Rheologica Acta, Online(2), 1-8. [More Information]
  • Tanner, R., Dai, S., Qi, F., Newberry, M., Bekes, F. (2009). Basic dough rheology and the Kieffer Test. 5th International Symposium on Food Rheology and Structure, Zurich, Switzerland: ETH Zurich.
  • Tanner, R., Hadinata, C., Lee Wo, D. (2009). Behaviour of a simple crystallisation model in tube and channel flow. Rheologica Acta, 48(5), 499-507. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2009). Crystallization of alkanes under quiescent and shearing conditions. Journal of Non-Newtonian Fluid Mechanics, 160, 99-21. [More Information]
  • Xue, S., Barton, G., Tanner, R. (2009). Heat Transfer within a Furnace for Drawing Microstructured Optical Fibres. 18th International Conference on Plastic Optical Fibers (POF 2009), CD-rom: University of Sydney.
  • Tanner, R., Lee Wo, D., Zheng, R., Costa, F. (2009). Impact of Colorants on Polypropylene Rheology. Advances in Polymer Science and Technology 1, Linz, Austria: Trauner Verlag.
  • Housiadas, K., Tanner, R. (2009). On the rheology of a dilute suspension of rigid spheres in a weakly viscoelastic matrix fluid. Journal of Non-Newtonian Fluid Mechanics, 162(1-3), 88-92. [More Information]
  • Tanner, R., Qi, F. (2009). Stretching, shearing and solidification. Chemical Engineering Science, 64(22), 4576-4579. [More Information]
  • Tanner, R. (2009). The changing face of rheology. Journal of Non-Newtonian Fluid Mechanics, 157(3), 141-144. [More Information]
  • Lee Wo, D., Tanner, R. (2009). The impact of blue organic and inorganic pigments on the crystallization and rheological properties of isotactic polypropylene. Rheologica Acta, Online, 1-14. [More Information]
  • Tanner, R. (2009). Yielding behaviour without an explicit yield stress for soft materials. XXII International Congress of Theoretical and Applied Mechanics, South Australia: ICTAM.

2008

  • Qi, F., Dai, S., Newberry, M., Love, R., Tanner, R. (2008). A simple approach to predicting dough sheeting thickness. Journal of Cereal Science, 47(3), 489-495. [More Information]
  • Tanner, R., Qi, F., Dai, S. (2008). Bread dough rheology and recoil I. Rheology. Journal of Non-Newtonian Fluid Mechanics, 148, 33-40. [More Information]
  • Tanner, R., Dai, S., Qi, F. (2008). Bread dough rheology in biaxial and step-shear deformations. Rheologica Acta, 47(7), 739-749. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2008). Complex Rheology of Molecularly Thin Films and the Role of Surface and Structure. The XVth International Congress On Rheology- The Society of Rheology 80th Annual Meeting, United States of America: American Institute of Physics (AIP).
  • Fan, X., Phan-Thien, N., Tanner, R. (2008). Numerical Study on Some Rheological Problems of Fibre Suspensions: Numerical Simulations of Fibre Suspensions. Germany: VDM Verlag Dr Muller.
  • Tanner, R., Jabbarzadeh-Khoei, A. (2008). Thin-film lubrication nano-rheology via molecular dynamics. Australian Journal of Mechanical Engineering, 5(1), 43-50.
  • Tanner, R. (2008). Towards a simple constitutive model for bread dough. The XVth International Congress On Rheology- The Society of Rheology 80th Annual Meeting, United States of America: American Institute of Physics (AIP).

2007

  • Mai-Duy, N., Tanner, R. (2007). A collocation method based on one-dimensional RBF interpolation scheme for solving PDEs. International Journal of Numerical Methods for Heat and Fluid Flow, 17(2), 165-186. [More Information]
  • Mai-Duy, N., Tanner, R. (2007). A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201(1), 30-47. [More Information]
  • Tanner, R., Dai, S., Qi, F. (2007). Bread dough rheology and recoil 2. Recoil and relaxation. Journal of Non-Newtonian Fluid Mechanics, 143, 107-119. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2007). Crystal bridges, tetratic order, and elusive equilibria: The role of structure in lubrication films. The Journal of Physical Chemistry B, 111(39), 11354-11365. [More Information]
  • Yu, Z., Shao, X., Tanner, R. (2007). Dynamic simulation of shear-induced particle migration in a two-dimensional circular couette device. Chinese Journal of Chemical Engineering, 15(3), 333-338. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2007). Molecular Dynamics Simulation of Crystallization under Quiescent and Shearing Conditions. International Conference on Computational Methods in Science and Engineering 2007 (ICCMSE 2007), Melville, New York United States: American Institute of Physics (AIP).
  • Tanner, R. (2007). Revisitation of PTT model. Journal of Central South University of Technology, 14(Suppl 1), 26-29. [More Information]
  • Yu, Z., Phan-Thien, N., Tanner, R. (2007). Rotation of a spheroid in a Couette flow at moderate Reynolds numbers. Physical Review E, 76, 026310-1-026310-11. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2007). The structural origin of the complex rheology in thin dodecane films: Three routes to low friction. Tribology International, 40(10-12), 1574-1586. [More Information]

2006

  • Mai-Duy, N., Tran-Cong, T., Tanner, R. (2006). A domain-type boundary-integral-equation method for two-dimensional biharmonic Dirichlet problem. Engineering Analysis with Boundary Elements, 30(10), 809-817. [More Information]
  • Mai-Duy, N., Tran-Cong, T., Tanner, R. (2006). A new high-order time-kernel BIEM for the Burgers equation. CMES: Computer Modeling in Engineering and Sciences, 16(3), 177-186.
  • Large, M., Van Eijkelenborg, M., Lwin, R., Barton, G., Poladian, L., Tanner, R., Xue, S. (2006). An Overview of mPOF Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Dai, S., Tanner, R. (2006). Anisotropic thermal conductivity in sheared polypropylene. Rheologica Acta, 45(3), 228-238. [More Information]
  • Tanner, R., Xue, S. (2006). Change of shape of an off-axis hole during optical fibre drawing. Acta Mechanica, 187(1-4), 129-138. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2006). Crystal bridge formation marks the transition to rigidity in a thin lubrication film. Physical Review Letters, 96(20), 206102-1-206102-4. [More Information]
  • Ausias, G., Fan, X., Tanner, R. (2006). Direct simulation for concentrated fibre suspensions in transient and steady state shear flows. Journal of Non-Newtonian Fluid Mechanics, 135(1), 46-57. [More Information]
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Experimental Analysis of Hole Deformation During Microstructured Polymer Optical Fibre Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2006). Low friction lubrication between amorphous walls: Unraveling the contributions of surface roughness and in-plane disorder. Journal of Chemical Physics, 125(3), 034703-1-034703-11. [More Information]
  • Jabbarzadeh-Khoei, A., Tanner, R. (2006). Molecular Dynamics Simulation and its Application to Nano-Rheology. In Bindings D M and Walters K (Eds.), Rheology Reviews, (pp. 165-216). Aberystwyth UK: British Society of Rheology.
  • Wang, C., Dai, S., Tanner, R. (2006). On the compressibility of bread dough. Korea - Australia Rheology Journal, 18(3), 127-131.
  • Tanner, R. (2006). On the congruence of some network and pom-pom models. Korea - Australia Rheology Journal, 18(1), 9-14. [More Information]
  • Xue, S., Large, M., Barton, G., Tanner, R., Poladian, L., Lwin, R. (2006). Role of Material Properties and Drawing Conditions in the Fabrication of Microstructured Optical Fibers. Journal of Lightwave Technology, 24(2), 853-860. [More Information]
  • Dai, S., Qi, F., Tanner, R. (2006). Strain and strain-rate formulation for flow-induced crystallization. Polymer Engineering and Science, 46(5), 659-669. [More Information]
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Validating the Rheological Changes during the Fibre Drawing of Microstructured Optical Fibres. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.

2005

  • Tanner, R., Qi, F. (2005). A comparison of some models for describing polymer crystallization at low deformation rates. Journal of Non-Newtonian Fluid Mechanics, 127(2-3), 131-141. [More Information]
  • Tanner, R., Qi, F. (2005). A phenomenological approach to suspensions with viscoelastic matrices. Korea - Australia Rheology Journal, 17, 149-156. [More Information]
  • Tanner, R. (2005). A Revisitation of the PTT Model. 4th Pacific Rim Conference on Rheology (PRCR4), Shanghai, China: Science Press USA.
  • Liang, G., Hawkett, B., Tanner, R. (2005). A rheological investigation of the self-assembly and adsorption behavior of a surfactant salt. Journal of Colloid and Interface Science, 292(1), 46-53. [More Information]
  • Tanner, R. (2005). A theory of die-swell revisited. Journal of Non-Newtonian Fluid Mechanics, 129(2), 85-87. [More Information]
  • Mai-Duy, N., Tanner, R. (2005). An effective high order interpolation scheme in BIEM for biharmonic boundary value problems. Engineering Analysis with Boundary Elements, 29(3), 210-223. [More Information]
  • Mai-Duy, N., Tanner, R. (2005). Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48(12), 1309-1336. [More Information]
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part I: Problem formulation and numerical modeling of transient draw process. Journal of Lightwave Technology, 23(7), 2245-2254. [More Information]
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part II: Numerical modeling of steady-state draw process. Journal of Lightwave Technology, 23(7), 2255-2266. [More Information]
  • Xue, S., Large, M., Barton, G., Tanner, R., Lwin, R., Poladian, L. (2005). Hole Deformation Behaviour in Drawing Microstructured Optical Fibres. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Barton, G., Keawfanapadol, T., Large, M., Lwin, R., Poladian, L., Tanner, R., Xue, S. (2005). Microstructured polymer optical fibres - from concept to reality. 7th World Congress of Chemical Engineering, Glasgow, Scotland: IChemE.
  • Tanner, R., Zdilar, A., Nasseri, S. (2005). Recoil from elongation using general network models. Rheologica Acta, 44(5), 513-520. [More Information]
  • Mai-Duy, N., Tanner, R. (2005). Solving high-order partial differential equations with indirect radial basis function networks. International Journal for Numerical Methods in Engineering, 63(11), 1636-1654. [More Information]
  • Ellero, M., Tanner, R. (2005). SPH simulations of transient viscoelastic flows at low Reynolds number. Journal of Non-Newtonian Fluid Mechanics, 132(1), 61-72. [More Information]
  • Fan, Y., Yang, H., Tanner, R. (2005). Stress boundary layers in the viscoelastic flow past a cylinder in a channel: limiting solutions. Acta Mechanica Sinica, 21(4), 311-321. [More Information]
  • Lwin, R., Barton, G., Keawfanapadol, T., Large, M., Poladian, L., Tanner, R., Van Eijkelenborg, M., Xue, S. (2005). Suspended Core Microstructured Polymer Optical Fibre: Connecting to Reality. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Liang, G., Hawkett, B., Tanner, R. (2005). The determination of the isoelectric point from measurements of dispersion viscosity as a function of pH. Journal of Dispersion Science and Technology, 26(4), 469-472. [More Information]
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2005). Very low friction state of a dodecane film confined between mica surfaces. Physical Review Letters, 94(12), 126103-126103-4. [More Information]

2004

  • Mai-Duy, N., Tanner, R. (2004). An Efficient Bem For Numerical Solution Of The Biharmonic Boundary Value Problem. The 2004 International Conference on Computational Experimental Engineering and Sciences (ICCES04). Tech Science Press.
  • Xue, S., Barton, G., Large, M., Lwin, R., Poladian, L., Tanner, R. (2004). Analysis of Hole Deformation in Drawing Microstructured Optical Fibres. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Yu, Z., Phan-Thien, N., Tanner, R. (2004). Dynamic Simulation Of Sphere Motion In A Vertical Tube. Journal of Fluid Mechanics, 518, 61-93. [More Information]
  • Large, M., Barton, G., Lwin, R., Poladian, L., Tanner, R., Xue, S., Yu, H. (2004). Hole Deformation in Microstructured Optical Fibres. ECOC 2004 - 30th European Conference on Optical Communications, Stockholm, Sweden: (IEEE) Institute of Electrical and Electronics Engineers.
  • Poladian, L., Barton, G., Large, M., Lwin, R., Pok, W., Tanner, R., Van Eijkelenborg, M., Xue, S., Yu, H. (2004). Microstructured Polymer Optical Fibres: Impact of Imperfections in Design and Manufacture. OECC/COIN 2004 - Optoelectronics and Communications Conference and Conference on Optical Internet.
  • Nasseri, S., Bilston, L., Fasheun, B., Tanner, R. (2004). Modelling The Biaxial Elongational Deformation Of Soft Solids. Rheologica Acta, 43(1), 68-79. [More Information]
  • Mai-Duy, N., Tanner, R. (2004). Numerical Analysis Of Corrugated Tube Flow Using RBFNs. The XIVth International Congress on Rheology (ICR 2004). The Korean Society of Rheology.

2003

  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2003). A parallel algorithm for molecular dynamics simulation of branched molecules. Computer Physics Communications, 150(2), 65-84. [More Information]
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2003). Effect of Molecular Shape on Rheological Properties in Molecular Dynamics Simulation of Star, H, Comb and Linear Polymer Melts. Macromolecules, 36(13), 5020-5031. [More Information]
  • Tanner, R., Tanner, E. (2003). Heinrich Hencky: a rheological pioneer. Rheologica Acta, 42(1-2), 93-101. [More Information]
  • Tanner, R. (2003). On the flow of crystallizing polymers. I. Linear regime. Journal of Non-Newtonian Fluid Mechanics, 112(2-3), 251-268. [More Information]
  • Fan, Y., Dai, S., Tanner, R. (2003). Rheological properties of some thermotropic liquid crystalline polymers. Korea - Australia Rheology Journal, 15(3), 109-115.
  • See, H., Tanner, R. (2003). Shear rate dependence of the normal force of a magnetorheological suspension. Rheologica Acta, 42(1-2), 166-170. [More Information]
  • Tanner, R., Nasseri, S. (2003). Simple constitutive models for linear and branched polymers. Journal of Non-Newtonian Fluid Mechanics, 116(1), 1-17. [More Information]
  • Kitoko, V., Keentok, M., Tanner, R. (2003). Study of shear and elongational flow of solidifying polypropylene melt for low deformation rates. Korea - Australia Rheology Journal, 15(2), 63-73.

2002

  • Tanner, R. (2002). A suspension model for low shear rate polymer solidification. Journal of Non-Newtonian Fluid Mechanics, 102(2), 397-408. [More Information]
  • Carter, J., Poulos, H., Tanner, R. (2002). Biographical memoirs: John Robert Booker 1942-1998. Historical Records of Australian Science, 14(2), 143-168.
  • Tanner, R., Xue, S. (2002). Computing transient flows with high elasticity. Korea - Australia Rheology Journal, 14(4), 143-159.
  • Former, C., Castro, J., Fellows, C., Tanner, R., Gilbert, R. (2002). Effect of Branching and Molecular Weight on the Viscoelastic Properties of Poly(butyl acrylate). Journal of Polymer Science, Part A: Polymer Chemistry, 40(20), 3335-3349. [More Information]
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2002). Effect of branching on the lubricant properties: A molecular dynamics study. In D Dowson, M Priest, G Dalmaz, AA Lubrecht (Eds.), Boundary and Mixed Lubrication: Science and Applications, (pp. 231-240). United States: Elsevier.
  • Tanner, R. (2002). Note on the beginnings of sinusoidal testing methods. Korea - Australia Rheology Journal, 14(2), 87-90.
  • Uthayakumaran, S., Beasley, H., Stoddard, F., Keentok, M., Phan-Thien, N., Tanner, R., Bekes, F. (2002). Synergistic and additive effects of three high molecular weight glutenin subunit Loci. I. Effects on wheat dough rheology. Cereal Chemistry, 79(2), 294-300.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2002). The effect of branching on slip and rheological properties of lubricants in molecular dynamics simulation of Couette shear flow. Tribology International, 35(1), 35-46. [More Information]
  • Keentok, M., Newberry, M., Gras, P., Bekes, F., Tanner, R. (2002). The rheology of bread dough made from four commercial flours. Rheologica Acta, 41(1-2), 173-179.
  • Xue, S., Phan-Thien, N., Tanner, R. (2002). Upwinding with deferred correction (UPDC): an effective implementation of higher-order convection schemes for implicit finite volume methods. Journal of Non-Newtonian Fluid Mechanics, 108(1-3), 1-24. [More Information]

2001

  • Tanner, R. (2001). A century of stress and strain in rheology. 3rd Pacific Rim Conference on Rheolgoy. Ads & Adea.
  • Xue, S., Tanner, R., Phan-Thien, N. (2001). Direct numerical investigation on three-dimensional, time-dependent Newtonian rotational flow between two rotating coaxial disks with a finite domain. 1st Asian-Pacific Congress on Computational Mechanics. UNSW Australian Defence Force Academy.
  • Xue, S., Tanner, R., Phan-Thien, N. (2001). Direct numerical simulations on torsional flow of viscoelastic fluid in parallel plate rheometer with a finite radial domain. 3rd Pacific Rim Conference on Rheolgoy. Ads & Adea.
  • Fan, Y., Tanner, R., Phan-Thien, N. (2001). Fully developed viscous and viscoelastic flows in curved pipes. Journal of Fluid Mechanics, 440, 327-357.
  • Uthayakumaran, S., Newberry, M., Tanner, R., Phan-Thien, N. (2001). Gluten and starch: builders of dough rheology. Cereals 2000, : UNSW Australian Defence Force Academy.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2001). Lubrication processes near wall asperities: a molecular dynamics study. In G. Dalmaz, A.A. Lubrecht, D. Dowson and M. Priest (Eds.), Tribology Research: From model experiment to industrial problem, (pp. 779-785). Netherlands: Academic Press.
  • Uthayakumaran, S., Hubraq, T., Keentok, M., Tanner, R., Daqiq, L., Beasley, H., Partridge, S., Gras, P., Bekes, F. (2001). Role of HMW-GS in defining the basic and applied rheological parameters and end-use quality of wheat flour dough. Cereas l2000, : UNSW Australian Defence Force Academy.
  • Fan, Y., Phan-Thien, N., Tanner, R. (2001). Tangential flow and advective mixing of viscoplastic fluids between eccentric cylinders. Journal of Fluid Mechanics, 431, 65-89.
  • Keentok, M., Newberry, M., Tanner, R., Gras, P., Bekes, F. (2001). The rheology of bread dough made from commercial flours. Cereals 2000, : UNSW Australian Defence Force Academy.

1980

  • Tanner, R. (1980). A new inelastic theory of extrudate swell. Journal of Non-Newtonian Fluid Mechanics, 6(3-4), 289-302. [More Information]

For support on your academic profile contact .